Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL PPX™ Resin PPX640 - Asia - (PPE+PP)-GF40 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL PPX™ Resin PPX640 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl PPX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL PPX™ 640 resin is a 40% glass reinforced alloy of polyphenylene ether (PPE) + Polypropylene (PP). This injection moldable grade exhibits high stiffness along with temperature performance, impact resistance, hydrolytic stability, and dimensional stability. NORYL PPX640 resin is an excellent candidate for applications requiring a good chemical resistance and high stiffness.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 1.3 g/10min ASTM D 1238
温度 260 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ASTM数据
降伏応力 95 MPa ASTM D 638
破壊応力 95 MPa ASTM D 638
破断伸び 6.4 % ASTM D 638
曲げ弾性率 8310 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 106 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 96 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in 576 J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
DTUL @ 66 psi 158 °C ASTM D 648
DTUL @ 264 psi 146 °C ASTM D 648
ビカット軟化温度 163 °C ASTM D 1525
その他の特性.値単位テスト基準
密度 1300 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 65 - 75 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 260 - 305 °C -
金型温度 40 - 65 °C -
Zone 1 245 - 290 °C -
Zone 2 250 - 290 °C -
Zone 3 255 - 300 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
耐薬品性
Hydrolytically Stable
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.